Arrow Fat Left Icon Arrow Fat Right Icon Arrow Right Icon Cart Icon Close Circle Icon Expand Arrows Icon Hamburger Icon Information Icon Down Arrow Icon Mail Icon Mini Cart Icon Person Icon Ruler Icon Search Icon Shirt Icon Triangle Icon Bag Icon Play Video

Lighting

  • Balanced floor light

    Adam-Fullerton

    Balanced floor light

    $995.00

    v

    Adam-Fullerton

    Balanced floor light

    $995.00

    #169

    Balanced Floor Light

    Born on 9/27/16

    This huge floor light has large span from a small footprint of the tripod it balanced on, the boom is counterweighted by a cast concrete truncated pyramid held in place with a vintage hook, the shade is a slash cut from the bottom of a disposable helium tank which has been stripped back to bare metal. A half chrome bulb and braided power cord have been used for a vintage look. All the steel is protected with a marine grade oil and the concrete has been sealed with boiled linseed oil.

    Visit product page
  • Bike Bar Spots

    Adam-Fullerton

    Bike Bar Spots

    Sold out

    Sold out
    v

    Adam-Fullerton

    Bike Bar Spots

    $425.00

    Sold out

    #92

    Bike Bar Spots

    Re-born on 7/4/15
    Influenced by Toronto’s growing bicycle culture and the resultant availability of spare bike parts, these two brass-capped, aluminium spot lights have been polished and mounted to road bike handlebars creating an interesting directional lighting fixture. The spot-lights and handlebar offer amazing adjustability, so you can use this piece as a down light over a table or workstation, or tilt and angle the lights to illuminate collectibles, pictures, or wall art. Vintage braided twisted cable and fitting hardware included.

    Maximum incandescent bulbs recomended - 40w each

    Visit product page
  • Clamping desk light

    Adam-Fullerton

    Clamping desk light

    Sold out

    Sold out
    v

    Adam-Fullerton

    Clamping desk light

    $345.00

    Sold out

    #144

    Clamping Desk Light

    Re-Born 1/19/16

     

    A vintage sash clamp is the base and starting point for the design of this interesting desk light. The shade is an out-of-service, polished steel fire extinguisher and turned aluminium bushes allows the piece to swivel. Avoid wasting precious table space and pivot and tilt the light where you need it. The steel is protected in linseed oil, to maintain the finish you may wish to re-apply oil every 6-12 months. Finished with vintage powercord and retro inline switch max incandescent bulb recommended - 60w

    Visit product page
  • Cranky Desk Light

    Adam-Fullerton

    Cranky Desk Light

    Sold out

    Sold out
    v

    Adam-Fullerton

    Cranky Desk Light

    $295.00

    Sold out

    #140

    Cranky Desk Light

    Re Born on 1/4/16
    A cast aluminium conduit cover is mounted on two salvaged bike cranks and set on a small section of a structural steel I-beam which was a cast-off from a job-site that produced an attractive edge once cleaned up. Fitted with brass details, twisted, braided power cord and a vintage bulb.

    Metal parts are protected with a marine oil, dust with a clean dry cloth when necessary, max incandescent bulb recommended - 60w

    Visit product page
  • Flared Stainless Pendant

    Adam-Fullerton

    Flared Stainless Pendant

    Sold out

    Sold out
    v

    Adam-Fullerton

    Flared Stainless Pendant

    $325.00

    Sold out

    #91

    Flared Stainless Pendant

    Re-born on 7/21/15
    We picked up this discarded stainless steel fire extinguisher ages ago, but the vision only just happened. With our recent saga of salvaged bike parts being used a bmx bike rim was perfect to hold the 36 fingers from the extinguisher flared out around it to make a very interesting and unique shape, vintage braided power cord hold the pendant to the ceiling rose held together with fantastic brass detailing. Enough cord is supplied to have the light at 5’ from the ceiling and it can be shortened to just under 18”. Fittings included.

    Visit product page
  • Made in Canada Spot Light

    Adam-Fullerton

    Made in Canada Spot Light

    Sold out

    Sold out
    v

    Adam-Fullerton

    Made in Canada Spot Light

    $725.00

    Sold out

    #141

    Made In Canada Spotlight

    Re Born on 12/23/15

     

     

    Left with the bottoms of a few uniquely engraved gallon jugs we wondered where they could fit into a new creation. Then we realized the diameter of the jar fit snug inside the fire extinguishers that we had recently salvaged. The “MADE IN CANADA” engraving makes for a special touch on the bottom of the jar that now houses the light inside the fire extinguisher lamp. The base of the lamp is made up of the 2nd half of the fire extinguisher and a 8 inch cast pipe coupler. Brass detailings allow the allow the lamp head to be pivoted and flipped without moving the base and the lamp is finished with vintage cord and a 50,000 hour bulb which won’t heat up. The steel is protected with linseed oil, to maintain the finish you may wish to re-apply oil every 6-12 months.

     

     

    Visit product page
  • Made In Canada Spotlight V2

    Adam-Fullerton

    Made In Canada Spotlight V2

    Sold out

    Sold out
    v

    Adam-Fullerton

    Made In Canada Spotlight V2

    $995.00

    Sold out

    #142

    Made In Canada Spotlight V2

    Re Born on 1/10/16

     

    Left with the bottoms of a few uniquely engraved gallon jugs we wondered where they could fit into a new creation. Then we realized the diameter of the jar fit snug inside the fire extinguishers that we had recently salvaged. The “MADE IN CANADA” engraving makes for a special touch on the bottom of the jar that now houses the light inside the fire extinguisher lamp. The base is made from a large porsche brake disk. Brass detailing allows the lamp head to be pivoted and tilted without moving the base and the lamp is finished with vintage cord and a 50,000 hour bulb which won’t heat up. The steel neck is  protected with linseed oil, to maintain the finish you may wish to re-apply oil every 6-12 months. The head is polished aluminium. Being a live finish you may wish to re-apply metal polish to maintain shine or watch the colouring change with age.

     

    Visit product page
  • Modern Tall Floor Light

    Adam-Fullerton

    Modern Tall Floor Light

    Sold out

    Sold out
    v

    Adam-Fullerton

    Modern Tall Floor Light

    $485.00

    Sold out

    #134

    Contemporary Overfloor Light

    Re born on 10/15/15

     

     

    This contemporary style floor light is sleek and elegant, salvaged from rebar supports and aluminium lamp shades which have been hand polished. Fitted with vintage power cord, a torpedo inline switch, and leather pads to prevent scratching floors.

     

    Visit product page
  • Raw-Steel Mirror

    Adam-Fullerton

    Raw-Steel Mirror

    Sold out

    Sold out
    v

    Adam-Fullerton

    Raw-Steel Mirror

    $465.00

    Sold out

    #162

    Raw Steel Mirror

     

    Born on 9/2/16

     

    Hand made steel mirror for the aspiring actor or make-up artist! This Hollywood style dressing mirror is fitted with standard size bulb holders, ready for incandescent or LED lights, brass details and vintage power cord included. The frame is finished in raw steel and protected with a marine oil, due to the nature of this finish we recommend minimising the contact with glass cleaners and alike on the steel. Incandescent bulbs, hanging bracket and mounting hardware is included.

     

    Back orders take up to four weeks to manufacture/

    Visit product page
  • Page 1 of 2