Adam-Fullerton
Made In Canada Spotlight V2
$995.00
Adam-Fullerton
Made In Canada Spotlight V2
$995.00
#142
Made In Canada Spotlight V2
Re Born on 1/10/16
Left with the bottoms of a few uniquely engraved gallon jugs we wondered where they could fit into a new creation. Then we realized the diameter of the jar fit snug inside the fire extinguishers that we had recently salvaged. The “MADE IN CANADA” engraving makes for a special touch on the bottom of the jar that now houses the light inside the fire extinguisher lamp. The base is made from a large porsche brake disk. Brass detailing allows the lamp head to be pivoted and tilted without moving the base and the lamp is finished with vintage cord and a 50,000 hour bulb which won’t heat up. The steel neck is protected with linseed oil, to maintain the finish you may wish to re-apply oil every 6-12 months. The head is polished aluminium. Being a live finish you may wish to re-apply metal polish to maintain shine or watch the colouring change with age.
Related products
-
Visit product page →#169
Balanced Floor Light
Born on 9/27/16
This huge floor light has large span from a small footprint of the tripod it balanced on, the boom is counterweighted by a cast concrete truncated pyramid held in place with a vintage hook, the shade is a slash cut from the bottom of a disposable helium tank which has been stripped back to bare metal. A half chrome bulb and braided power cord have been used for a vintage look. All the steel is protected with a marine grade oil and the concrete has been sealed with boiled linseed oil.
-
Sold outVisit product page →#92
Bike Bar Spots
Re-born on 7/4/15
Influenced by Toronto’s growing bicycle culture and the resultant availability of spare bike parts, these two brass-capped, aluminium spot lights have been polished and mounted to road bike handlebars creating an interesting directional lighting fixture. The spot-lights and handlebar offer amazing adjustability, so you can use this piece as a down light over a table or workstation, or tilt and angle the lights to illuminate collectibles, pictures, or wall art. Vintage braided twisted cable and fitting hardware included.Maximum incandescent bulbs recomended - 40w each
-
Sold outVisit product page →#144
Clamping Desk Light
Re-Born 1/19/16
A vintage sash clamp is the base and starting point for the design of this interesting desk light. The shade is an out-of-service, polished steel fire extinguisher and turned aluminium bushes allows the piece to swivel. Avoid wasting precious table space and pivot and tilt the light where you need it. The steel is protected in linseed oil, to maintain the finish you may wish to re-apply oil every 6-12 months. Finished with vintage powercord and retro inline switch max incandescent bulb recommended - 60w
-
Sold outVisit product page →#140
Cranky Desk Light
Re Born on 1/4/16
A cast aluminium conduit cover is mounted on two salvaged bike cranks and set on a small section of a structural steel I-beam which was a cast-off from a job-site that produced an attractive edge once cleaned up. Fitted with brass details, twisted, braided power cord and a vintage bulb.Metal parts are protected with a marine oil, dust with a clean dry cloth when necessary, max incandescent bulb recommended - 60w
v
